Technical Documentation / Emc - Medela Clario Toni Mode D'emploi

Electromagnetic Compatibility (EMC, IEC60601-1-2:2007 3rd Edition Table 1 and IEC 60601-1-
2:2014 4th Edition)
Electromagnetic Emissions
Clario Toni is intended for use in the electromagnetic environment specified below�
The customer or the user of Clario Toni should assure that they are used in such
environment�
Emission Tests
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctutions /
flicker emissions
IEC 61000-3-3
WARNINGS
Clario Toni should not be used adjacent to or stacked with other equipment� If adjacent
or stacked use is necessary, Clario Toni should be observed to verify normal operation in
the configuration in which it will be used�
326 |
Technical documentation
Compliance Electromagnetic environment – guidance
Group 1 Clario Toni uses RF energy only for its internal
function� Therefore, its RF emissions are very
low and are not likely to cause any interference
with nearby electronic equipment�
Class B Clario Toni is suitable for use in all establish-
ments, including domestic establishments and
those directly connected to the public low-
Class A
voltage power supply network that supplies buil-
dings used for domestic purposes�
Not applicable