Replacing The Rechargeable Battery - Medela Clario Toni Mode D'emploi

10 Replacing the rechargeable battery

WARNINGS
Before replacing the rechargeable battery, switch off the Clario Toni and pull the
mains plug from Clario Toni out of the fixed mains socket�
Before this operation, pull the mains plug out of the fixed mains socket.
1�
2�
3� Remove the old rechargeable battery�
4� Insert the new rechargeable battery�
5�
6� Close the lid of the battery compartment� Make sure that
the lid is closed well and that the battery cable is not
clamped or pinched�
7� Calibrate and test the rechargeable battery (see chapters
11 / 12)�
1�1 Open the lid of the battery
compartment on the bot-
tom of the Clario Toni�
2�1 Detach the battery cable
by pulling the plug�
5�1 Reattach the battery cable
by plugging in the plug�
Replacing the rechargeable battery
| 21