Safety Instructions - Medela Clario Toni Mode D'emploi

Safety instructions

– The Medela Clario Toni is a medical device that requires special safety measures in regard to
EMC� It must be installed and put into operation in accordance with the attached EMC infor-
mation�
– In each of the following cases, the device must not be used and it must be repaired by
Customer Services:
– if the power cord or the plug are damaged
– if the device is not functioning perfectly
– if the device is damaged
– if the device shows clear safety defects�
– Keep the power supply cord away from hot surfaces�
– The mains plug and the on / off switch must not come into contact with moisture�
– Never pull the mains plug out of the fixed mains socket by pulling on the power supply cord!
– Never leave the device unattended when it is switched on�
– The pump must stand upright during use�
– Never place the power supply cord around your neck�
– Never use the device at high room temperatures, while bathing or showering, if you are very
tired or in an environment where there is a risk of explosion�
– Never place the device in water or other liquids�
– When using single use, sterile products, please note that they are not intended to be
reprocessed� Reprocessing could cause loss of mechanical, chemical and / or biological
characteristics� Reuse could cause cross contamination�
– Contact your local Medela customer service representative for assistance with product
operations�
– Wear gloves for all operations�
These instructions for use must be kept for later reference�
Warnings and safety instructions
| 7