Replacing The Rechargeable Battery - Medela Clario Toni Mode D'emploi

Replacing the rechargeable battery

WARNINGS
Before replacing the rechargeable battery, switch off
the Clario Toni and pull the mains plug from Clario Toni
out of the fixed mains socket�
1�
2�
3� Remove the old rechargeable battery�
4� Insert the new rechargeable battery�
5�
6� Close the lid of the battery compartment� Make sure
that the lid is closed well and that the battery cable is
not clamped or pinched�
7� Calibrate and test the rechargeable battery (see
chapters Battery data and test/Battery calibration)�
24
Open the lid of the battery
compartment on the bottom of
the Clario Toni�
Detach the battery cable by
pulling the plug�
Reattach the battery cable by
plugging in the plug�