How To Operate The Appliance; Thermostat Setting - BORETTI BKR102 Notice D'emploi

PART 2.

HOW TO OPERATE THE APPLIANCE

Thermostat Setting

• Thermostat automatically regulates the inside temperature of the refrigerator
compartment and freezer compartment. By rotating the knob from position 1 to 5,
colder temperatures can be obtained.
• The " 0 " position shows thermostat is closed and no cooling is available.
• For short-term storage of food in the freezer compartment, you can set the knob
between minimum and medium position (1-3).
• For long-term storage of food in the freezer compartment, you can set knob medium
position.(3-4)
• Note that; the ambient temperature, temperature of the freshly stored food and
how often the door is opened, affects the temperature in the refrigerator and
freezer compartments. If required, change the temperature setting.
• When you first switch on the appliance, you should ideally try to run it without any food
in for 24 hours and not open the door. If you need to use it straight away, try not to put
much food inside.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting in order not to damage the compressor.
• LARDERS (without star rating): Larders (coolers) have not any freezer compartment
but can cool down to 4-6°C.
EN - 35 -