Thermostat Setting; Display Panel; How To Operate The Freezer - BORETTI BV-89 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PART 2.

HOW TO OPERATE THE FREEZER

Thermostat Setting

The freezer thermostat automatically regulates the inside temperature of the compartments.
By rotating the knob from position 1 to 3, colder temperatures can be obtained. "0" position shows
thermostat is closed and no cooling will be available.
Freezer Thermostat Setting;
0 : The appliance is switched off.
1 - 2 : For short-term storage of food in the freezer compartment, you can set the knob
between minimum and medium position.
3 - 4 : For long-term storage of food in the freezer compartment, you can set knob to
medium position.
5 : For freezing the fresh food. The appliance will run for colder temperatures.
Freezing with Super Freeze (SF button): Press the SF button, the freezer will start to run
continuously with maximum performance (observe that the SF lamp will light on orange when you
turn on the SF button). The freezer temperature will decrease and the appliance will switch to to
the lowest temperature.
Place the food to be frozen quickly inside the freezer, preferably in the top drawers. Once the
food is frozen, you must turn off the SF button and set the thermostat knob to desired position.
Note that: the ambient temperature, temperature of the freshly stored food and how often
the door is opened, affects the temperature in the refrigerator and freezer compartments. If
required, change the temperature setting.

Display Panel

Super freeze light (SF light): Lights orange, when the SF button is turned on.
Power light: Lights green automatically, when the appliance is connected to the power supply.
Alarm light: Lights red, when the temperature rises to a critical point in side the freeze.

Publicité

Table des Matières
loading

Table des Matières