Switch Of Mowing Mechanism Lifting; Brake; Parking Brake Lever; Travel Pedal - AGS Seko FRONTJET AP 105 Mode D'emploi

6.1.6 SWITCH OF MOWING MECHANISM LIFTING

This switch serves for the mowing mechanism lifting into the transport position
and to its lowering into the working position set by the lever 6.1.11.
Mowing mechanism positions are: A - transport position
B - working position
To lift or lower, depress the switch and keep it depressed.
Release the switch immediately when the end position
is reached. Although the end positions are secured by a
safety clutch, a breakdown of the electrical installation is
threatening in case the switch is kept depressed for a longer
time.

6.1.7 BRAKE

When the brake pedal is fully stepped on, the mowing machine is braked to a
stop. Never use the brake simultaneously with the function of the travel -
a damage of the gearbox is threatening.

6.1.8 PARKING BRAKE LEVER

The parking brake lever has 2 positions. Before shifting the lever into the
"P" position, step on the brake pedal. The disengaging of the parking brake
is executed by stepping on the brake pedal, at this the arrestment of the
lever is automatically released.
Brake released
Brake engaged

6.1.9 TRAVEL PEDAL

It controls the drive of wheels and machine travel speed in both directions.
Forward drive:
Step on slowly the pedal with the toe in the "F" direction. The bigger
stepping on the higher speed and vice versa.
Backward drive: Step on slowly the pedal with the heel in the "R"
direction. The bigger stepping on the higher speed and vice versa. As
soon as the pedal is relased, it returns automatically into the "N" (neutral)
position and the machine stops.
WARNING !!!
The change of the drive direction is only possible after the machine stops.
33