Tractel FABA AL-D Instructions D'emploi Et D'entretien page 22

Declaration of conformity
Tractel Greifzug GmbH, Scheidtbach-
straße 19-21, 51469 Bergisch Gladbach,
Germany, the manufacturer, hereby
declares that the safety equipment (PPE)
described in this manual:
1. complies with the provisions listed in the
European Directive (EU) 2016/425,
2. Is identical with the PPE, which adheres
to the EU prototype test certifi cation and
CE-certifi cation issued by a notifi ed test
institute, the "DEKRA Testing and Cer-
tifi cation GmbH, Dinnendahlstraße 9,
44809 Bochum, Germany, Registration
No. 0158",
3. Was tested in compliance with standard
EN 353-1:2018
4. the stipulated testing was subject to and
complies with Annex VII of Directive (EU)
2016/425 and was carried out at a registered
certifi cation offi ce: DEKRA Testing and
Certifi cation GmbH, Dinnendahlstraße
9, 44809 Bochum, Germany, Registration
No. 0158.
Product name
The markings on the fall arrest slider include
the following details (Page 3):
A • Read the user manual
B • EN standard 353-1:2018
C • Sticker: next inspection
D • CE-sign (0158)
E • "Up" direction arrow
F • Manufacturer and product designation
G • Serial number
H • Year of manufacture (18 = 2018)
I • Min./max. Nominal load
K • Permissible guides
Labelling on the strap fall attenuator:
a • System and manufacturer label
b • Ref. strap fall attenuator and serial no. /
year-calendar week
c • Name
d • Standard related to the fall prevention
device
• Read the user manual symbol
f • CE label (Testing authority no.)
22
Ladder / rail marking:
1 • Manufacturer
2 • Type climbing protection system symbol
3 • Read the user manual
4 • Use of personal protective equipment against
falling is mandatory
5 • Min./max. Charge nominale
6 • Product designation
7 • Minimum distance of the persons on the
climbing protection system
8 • Permissible fall arrest slider types
9 • System number
10 • Year of manufacture
11 • CE label (Testing authority no.)
Function and description
The FABA™ climbing protection system
complies with standard EN 353-1. It will
be supplied as either a complete climbing
protection ladder (climbing protection
rails with rungs) or as a climbing protec-
tion rail for fi tting to existing ladders or
other manhole steps. The fall arrest slider
is an integral part of the climbing protec-
tion system and together with the clim-
bing protection rails it forms a package of
fall arrest systems that safeguard against
falling. Each FABA™ fall protection de-
vice has undergone, in conjunction with
suitable guide rails, EU proto type testing
at a registered certifi ca tion offi ce.
The FABA™ fall arrest slider runs in
the climbing protection rail profi le and
it accompanies the user, without any
manual intervention being necessary,
when going up or down and locks in place
automatically in the rail in the event of a
fall. In this case the locking mechanism
on the fall arrest slider locks into one of
the notches in the rail profi le and this
prevents the fall arrest slider from moving
downwards and this action saves the user
from falling.
EN