Check Outlets And Switches - Amprobe TIC 300 PRO Mode D'emploi

Check Outlets and Switches

1. Push the ON/OFF push button to turn the unit on.
2. Push the LOW range push button.
3. Place the probe tip of the TIC 300 PRO against the
hot prong of an outlet or switch contact.
4. Increased beeping indicates higher voltage presence.
Detecting voltage in an
outlet (Note: disconnect
all power cords from the
outlet before testing)
Fig. 3 Finding a break/open
Fig. 4
(See Figs. 4 & 5)
OFF
OFF
OFF
OFF
OFF
OFF
Finding a breaker
8
ON OFF
OFF
ON
OFF
ON
ON
OFF
OFF
ON
ON
OFF
Fig. 5