Symbols And Warnings; Symbols; Unpacking And Inspection; Introduction - Amprobe AMB-50 Mode D'emploi

SYMBOLS AND WARNINGS

SYMBOLS

Battery
T
Double Insulated
B
Alternating Current
F
Direct Current
Application around and removal
,
from hazardous live conductors is
permitted
Do not dispose of this product as
=
unsorted municipal waste

UNPACKING AND INSPECTION

Your shipping carton should include:
1 AMB-50 Insulation Resistance Tester
1 Complete set of Test Leads
- 1 Plug type test Lead with Alligator clip (Green)
- 1 Plug type test Lead with Alligator clip (Black)
- 1 Two Plugs type test lead with Alligator clip (Red)
8 Batteries (1.5V, LR14)
1 Users Manual
1 Tool Box
1 Software
1 USB Cable
1 Power adaptor
If any of the items are damaged or missing, return the complete package to the place of purchase
for an exchange.

INTRODUCTION

AMPROBE, AMB-50 insulation resistance tester is a handheld instrument designed primarily to
make resistance/ insulation resistance measurement.

SAFETY INFORMATION

This Meter complies with the standards IEC61010 safety measurement requirement: in pollution
degree 2, overvoltage category (CAT. III 600V) and double insulation.
CAT II: Local level, appliance, PORTABLE EQUIPMENT etc., with smaller transient voltage
overvoltages than CAT. III
Use the Meter only as specified in this operating manual, otherwise the protection provided by the
Meter may be impaired.
�
Refer to the manual
X
Dangerous Voltage
J
Earth Ground
I
Thermal fuse rated 130°C
�
Complies with EU directives
Conform to relevant Australian
�
standards
2