Unpacking And Inspection - Amprobe TIC 300 PRO Mode D'emploi

• Observe the proper safety precautions when
working with voltages above 33 VAC RMS to avoid
electrical shock hazard.
• Before and after hazardous voltage measurements,
test the TIC 300 PRO by pressing the TEST button
and/or on a known source such as line voltage to
determine proper operation.
• Never ground yourself when taking measurements.
Do not touch exposed circuit elements.
• Do not operate the instrument in an explosive
atmosphere.
• Do not expose this product to rain or moisture. This
increases the risk of fire or electric shock.
• Do not rely on the TIC 300 PRO for testing shielded wire.
• Do not let the unit make contact with a live line
with voltage higher than 20 kV.
• Three phase feeder cables with conductors close to
each other may self-cancel the electric field and
will not be detected by the TIC 300 PRO tracer.
Verify that the phase conductors are separated
by at least 15 in (38.1 cm) before testing for AC
voltage.

UNPACKING AND INSPECTION

Your shipping carton should include:
1 TIC 300 PRO
1 9 V Alkaline Battery
1 User Manual
1 Carrying Case
If any of the items are damaged or missing, return the
complete package to the place of purchase for an exchange.
3