Symbols; Warning And Precautions - Amprobe TIC 300 PRO Mode D'emploi

SYMBOLS

�
Refer to the manual
X
Caution Dangerous Voltage
T
Double insulated
In compliance with the United States
United States Department of Labor
MSHA
Department Of Labor Mine Safety and Health
Mine Safety and Health Administration
Administration
Conforms to relevant Australian standards.
Conforms to relevant South Korean EMC standards.
Do not dispose of this product as unsorted
=
municipal waste.
For Use By Trained Personnel Only
Anyone using this instrument should be knowledgeable
and trained about the risks involved with measuring
medium and high voltage, especially in an industrial
setting, and the importance of taking safety precautions
and of testing the instrument before and after using it
to ensure that it is in good working condition.

WARNING and PRECAUTIONS

�
• Use extreme caution when testing live electrical
circuits due to risk of injury from electrical shock.
• Do not exceed the maximum overload limits
(see specifications) or the limits marked on the
instrument itself. Never test voltage more than
122 kV AC RMS.
• When using the HIGH range, the TIC 410A HOT
STICK or equivalent extension pole MUST be used.
• Comply with local and national safety
requirements.
• Use proper protective equipment as required by
local and national authorities.
2