Unpacking And Inspection; Feature - Amprobe LT-10 Mode D'emploi

For Use by Competent Persons
Anyone using this instrument should be knowledgeable and trained about
the risks involved with light fixtures and electrical connections. They
must understand the importance of taking safety precautions and testing
the instrument before and after use to ensure that it is in good working
condition.
Warning: Read Before Using
W
To avoid possible electric shock or personal injury:
• If the tester is used in a manner not specified by the manufacturer,
protection provided by the tester may be impaired.
• For indoor use only. Do not use the tester in rain, snow, damp or wet
locations. Do not use the tester around explosive gas or vapor. Do not
insert or remove the battery in an explosive or flammable environment.
• Comply with local and national safety requirements.
• Use proper protective equipment as required by local or national
authorities.

UNPACKING AND INSPECTION

Your shipping carton should include:
1 LT-10 Lamp Tester
1 Fluorescent lamp antenna
1 Sodium lamp antenna
1 Adaptor plate
1 Carrying case
1 9V alkaline battery
1 Users manual
If any of these items are damaged or missing, return the complete package
to the place of purchase for an exchange.
FEATURES
The Amprobe LT-10 Lamp Tester is a pocket-sized tool designed to
troubleshoot fluorescent lamps prior to installation or removal and verify
presence of voltage of electrical systems.
Three easy steps to troubleshoot lamps:
1. Check if fluorescent (electroluminescent) light bulb is damaged with
LAMP TEST and PIN TEST functions.
4