Mercedes-Benz 172 584 38 00 Notice D'utilisation page 30

Radio and satellite radio
28
Selecting a waveband
You can set the waveband using the following
commands:
"FM"
R
"AM"
R
"Weather band"
R
"Next station"/"Previous station"
You can start manual tuning and set the next
station using the following commands:
"Next station"
R
"Previous station"
R
Selecting a frequency
You can select radio frequencies within the
FM range (87.7 to 107.9 megahertz) and
within the AM range (530 to 1720 kilohertz)
directly. The Voice Control System also rec-
ognizes the words "frequency", "point", "meg-
ahertz" and "kilohertz".
Example of dialog:
\ Ninety seven point five megahertz
_ The Voice Control System sets the fre-
quency.
"Save station"
Use the command "Save station" to assign a
voice tag to the station currently selected.
Use this command:
to improve voice recognition of difficult
R
names
if you want to use a name of your own
R
You could, for example, save a station with
the name "Favorite station".
When you have said the command, the Voice
Control System prompts you up to three
times to say the station name. When repeat-
ing the station name, make sure that you pro-
nounce it in exactly the same way as you did
the first time. Otherwise, the name cannot be
Example of a station name.
5
saved and the Voice Control System cancels
the saving procedure.
Example of dialog:
\ Save station
^ Please say the station name.
\ Favorite station
^ Please repeat the station name.
\ Favorite station
^ "Favorite station" has been saved.
"Select station"
Use the command "Select station" to select
a receivable or stored station.
Example of dialog:
\ Select station
^ Please say the station name.
\ Favorite station
_ The Voice Control System sets the sta-
tion.
"Favorite station"
Using this command, you can select a stored
station.
Example of dialog:
\ Favorite station
_ The Voice Control System sets the sta-
tion.
"Select a channel number" (satellite
radio)
Use the command "Select a channel number"
to enter a channel number.
"Select category" (satellite radio)
You can use this command to select an avail-
able category.
Example of dialog:
\ Select category
^ Please say the name of the category.
5
5
5
5