Controller Connection - Agilent Technologies TwisTorr 84 FS AG Mode D'emploi

Controller Connection

J6 – Fan
The 24 Vdc, 150 mA maximum output voltage is present after
START pushbutton is pressed and will remain present until a
fault condition is displayed on front panel display or the
turbopump is stopped.
This is a dedicated output for the optional TwisTorr 84 pump
cooling fan (see orderable parts table).
If you already have fan installed, use the available adapter cable
to connect to the pump.
Figure 6
TwisTorr 84 FS AG Rack Controller User Manual / 87-901-037-01 (A)
Fan Connector
Technical Information
Controller Connection
213/297
17