Agilent Technologies TwisTorr 84 FS AG Mode D'emploi page 265

ANALOG OUT TYPE: permits selection of the type of signal
START OUT MODE: Selects the operating mode of the
SPEED OUT MODE (KRPM/Hz): permits selection of the
LCD CONTRAST
TwisTorr 84 FS AG Rack Controller User Manual / 87-901-037-01 (A)
to be sent to the programmable analogue output. One of the
following signals can be selected:
FREQUENCY: the drive frequency of the pump is shown
POWER: the power supplied to the pump is shown
TEMPERATURE: the temperature of the pump is shown
PRESSURE: the pressure read by the gauge is shown.
START output. Possible options:
RUNNING: the output is active when the pump is driven
STARTING: the output is active only during acceleration
ramp-up.
unit of measurement of the speed of rotation shown on the
display of the controller.
This setting acts only on the measurement shown on the
display. Possible options:
KRPM
Hz
Technical Information
Programming
265/297
17