Use - Agilent Technologies TwisTorr 84 FS AG Mode D'emploi

16 Instructions for Use

Use

Use

This paragraph describes the fundamental operating procedures.
Detailed information and operating procedures that envolve optional
connection or option are supplied in the paragraph "USE" of the
appendix "Technical Information".
Make all vacuum manifold and electrical connections and refer to
TwisTorr pump instruction manual before operating the TwisTorr
controller.
WARNING! To avoid injury to personnel and damage to the equipment, if the pump is
laying on a table make sure it is steady. Never operate the TwisTorr pump if
the pump inlet is not connected to the system or blanked off.
The input signal J1 connector should be left in position including the shipping
NOTE
links if no external connections are made. The forepump and TwisTorr pump can
be switched on at the same time.
200/297 TwisTorr 84 FS AG Rack Controller User Manual / 87-901-037-01 (A)