Controller Connection; P2 - Fan; P1 - Vent - Agilent Technologies TwisTorr 84 FS AG Mode D'emploi

Technical Information

Controller Connection

Controller Connection

P2 – Fan
The 24 Vdc, 100 mA output is present after Switch ON of the
controller. This is a dedicated output for the optional TwisTorr 84 FS
AG pump cooling fan (see orderable parts table). If a fan is already
installed, use the available adapter cable to connect to the pump.
Figure 9
P1 – Vent
Figure 10
This is the connector to control the optional vent valve (see
orderable parts table). The vent valve can be driven by the controller
automatically or via a serial line. If a 110 Vac-powered vent valve
has already been installed, it must be replaced (see orderable
parts table).
156/192
P2 Fan Connector
P1 Vent Connector
TwisTorr 84 FS AG Navigator Controller User Manual / 87-901-038-01 (A)