SOLIS VAC PRESTIGE 575 Mode D'emploi page 63

THE CO N TA I NE R W IL L N OT V A CUU M
1. Check whether the air extraction hose is securely attached to the lid of the con-
tainer and the air-extraction opening on the appliance.
2. Press down on the lid or the hose connection to ensure that the container is
airtight.
3. If the container or the adaptor is visibly damaged, change the container or
adaptor. Make sure that the container lid is tight all around.
4. If fluid leaks from the container during vacuuming, the container and it's con-
tents should first be cooled in the fridge.
5. Check the functioning of the appliance.
6. Check that the edge of the container and the lid are completely dry and that
there is 3 cm distance between the food and the top edge of the container.
If none of these suggestions apply, please contact Solis or a Solis approved service
station.
THE HEXA G O N AL CO NT AIN ER IS N O T M A I N T A I N IN G
A VACU UM
1. Check that control dial is at the "SEAL" position, before, during and after
vacuuming.
2. Check that the rubber seal is sitting correctly and is undamaged.
THE SQ UA RE CO NT A IN E R IS NO T M A I NT A IN I N G
A VACU UM
Check that the rubber seal is sitting correctly and is undamaged.
124
AC C ES S OR I E S:
Item-No Item
Vacuum films
922.52 2 rolls 15 x 600 cm
922.51 2 rolls 20 x 600 cm
922.50 2 rolls 30 x 600 cm
Vacuum bags
922.61 50 bags 20 x 30 cm
922.64 50 bags 30 x 40 cm
Square container
922.79 2 piece set
1'000 ml / 2'800 ml
Hexagonal container
922.78 3 piece set
700 ml / 1'400 ml / 2'000 ml
You can purchase accessories for your vacuum appliance in good stores
or from Solis of Switzerland Ltd.
Phone: 0848 804 884, Fax: 0848 804 890,
www.solis-onlineshop.ch (shipping only within Switzerland).
125