Güde GRK 250/500 Traduction Du Mode D'emploi D'origine page 14


Impact:
If the cut material is held in hand, the rotating circular
saw blade may throw it down and injure you! Secure
the cut material properly using a vice at all times!
2. Exposure to noise:

Hearing damage:
Hearing may get damaged if the appliance is worked with
for a long time. Personal protective aids to prevent hearing
damage should always be worn.
3. Other risks:

Thrown-off items or liquids:
Pieces of the cut material secured improperly may be
thrown off and cause injury as a result of circular saw
blade rotation. The cut material should always be secured
and protective glasses worn.
Disposal
Disposal instructions are illustrated in the form of pictograms
on the device or packaging. Description of the pictograms is
given in "Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during
transport. Packaging materials are usually selected according
to their effect on environment and disposal methods and can
therefore be recycled.
Returning of the packaging back to circulation saves
resources and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be dangerous
for children. Risk of suffocation!
Keep these parts of the packaging out of reach of children
and dispose as soon as possible.
Do not put electrical appliances to household waste - use
collection centres in your town. Ask the municipality
authorities where such collection centres can be found. If
electrical appliances are disposed in an uncontrolled manner,
hazardous substances can get into ground water through the
weather and - as a result - penetrate the food chain or poison
the flora and fauna for a number of years. When the
appliance is to be changed for a new one, the seller is legally
obliged to accept the old appliance, at least for free disposal.
Operator Requirements
The operator shall read the instruction manual carefully
before using the unit.
Qualification
No special qualification is required for use of the unit except
for detailed direction by a professional.
Minimum Age
The product has been designed to be used by persons over
18 years of age.
If the product is to be used by children below the age of 8 or
persons with reduced physical, sensory or mental skills or
with a lack of experience and knowledge, they must be
supervised or instructed in the safe use of the appliance and
understand the resulting risks. Children must not play with the
appliance. Cleaning and user maintenance must not be
performed by children without supervision.
Training
Use of the unit requires adequate lesson by a professional or
the use of the manual only. Special training is not required.
Technical Data
MITRE-BOX SAW GRK 250/300 #55003
Voltage/Frequency:
Motor Capacity:
Saw disc - Ø:
Saw disc speed:
Cutting width at 90°(max):
Cutting width at 45° (max):
Noise level L :
WA
Weight including support:
MITRE-BOX SAW GRK 250/500 #55004
Voltage/Frequency:
Motor Capacity:
Saw disc - Ø:
Saw disc speed:
Cutting width at 90°(max):
Cutting width at 45° (max):
Noise level L :
WA
Weight:
MITRE-BOX SAW GRK 210/300 #55006
Voltage/Frequency:
Motor Capacity:
Saw disc - Ø:
Saw disc speed:
Cutting width at 90°(max):
Cutting width at 45° (max):
Noise level L :
WA
Weight:
MITRE-BOX SAW GRK 210/300 #00531
Voltage/Frequency:
Motor Capacity:
Saw disc – Ø (2x):
Saw disc speed:
Cutting width at 90°(max):
Cutting width at 45° (max):
Noise level L :
WA
Weight:
MITRE-BOX SAW GRK 250/300 #00562
Voltage/Frequency:
Motor Capacity:
Saw disc – Ø (2x):
Saw disc speed:
Cutting width at 90°(max):
Cutting width at 45° (max):
Noise level L :
WA
Weight including support:
Transport and storage
If the appliance has not been used for a long time, unplug it
and keep it in a place inaccessible to children.
Make sure such place is dry and safe.
Cable Cross-section
Cable length Required Cross-section:
to 15 m
15 – 40 m
If the supply cables are too long while the cross-section of
them is small, the voltage drops, which may cause the motor
difficulties. Therefore, a supply cable of sufficient cross-
section is required for the saw to work perfectly. The cables
length show in the table applies to the distance between the
switchboard/fuse box and the trimming saw plug. It is of no
relevance then whether a supply and an extension cables are
combine or it is a supply cable alone.
14
230 V~50 Hz
1900 W
250 x 20
5000 rpm.
70 x 305 mm
40 x 205 mm
107 dB
24,5 kg
230 V~50 Hz
1900 W
250 x 20
5000 rpm.
70 x 500 mm
40 x 350 mm
107 dB
20 kg
230 V~50 Hz
1900 W
210 x 30
5000 rpm.
60 x 310 mm
35 x 210 mm
107 dB
14 kg
230 V~50 Hz
1900 W
210 x 30
5000 rpm.
60 x 310 mm
35 x 210 mm
110 dB
13,5 kg
230 V~50 Hz
1900 W
250 x 20
5000 rpm.
70 x 305 mm
40 x 205 mm
107 dB
25,5 kg
1,5 mm²
2,5 mm²