Güde GRK 250/500 Traduction Du Mode D'emploi D'origine page 11

GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Sighs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual
and/or on the unit:
Product Safety:
Product compliance with
respective EU standards
Bans:
General ban (in combination
with another pictograph)
Do not use the unit in rain
Precaution:
Warning/caution
Commands:
Read operating manual
before use
Wear goggles. Use ear
protectors
Environment Protection:
Wastes to be disposed of in
a professional manner not to
harm the environment
Faulty and/or disposed of
electrical/electronic
appliances to be collected by
authorised salvage places
Illustrative pictures! Translation of original operating instructions.
Do not reach in rotating parts
No pulling the cable
Use protection gloves
Cardboard packaging to be
collected for recycling.
Packaging:
Protect from moisture
Fragile
Technical Data:
Engine power
Revolutions
Cutting width at 90°
Weight
Scope of Delivery (Fig. 1)
1. Hand grip and a switch
2. Carbon brush guard
3. Tripping lever
4. Scale with angle adjustment
5. Saw table
6. Mounting holes
7. Table extension equipment
8. End stop
9. Sawdust collecting bag
10. Circular saw blade mounting
11. Locking button
12. Circular saw blade guard
13. Locking lever for chamfer cutting
14. Locking lever for mitre cutting
15. Exhaust connection/dust bag connection
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on the
day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with indication
of date of sale must be presented in case of claiming for the
warranty rights.
11
Keep Up
Connection
Ø circular saw blade
Cutting width at 45°