Function G8 "Temp Limits - Sygonix tx.5 Mode D'emploi

h) Function G8 "TEMP LIMITS"
You can set the lower and upper temperature limits for program-
ing in the function G2 here.
The limitation to the lower temperature range (e.g. only to
+5....+30 °C) accelerates programming. It is easy to programme
the wrong temperature here.
Proceed as follows:
1. After selecting this function G8 "TEMP LIMITS" and confi rm-
ing with "OK" (5), the value for the lower temperature limit
fl ashes in the display (display "TEMP MINLIMIT" at the bot-
tom of the display).
2. Set the lower temperature limit with the buttons "–" (3) and
"+" (2).
3. Confi rm the setting with "OK" (5).
The value for the upper temperature limit fl ashes in the
display (display „TEMP MAXLIMIT" at the bottom of the dis-
play).
4. Set the upper temperature limit with the buttons "–" (3) and
"+" (2).
5. Confi rm the setting with "OK" (5).
The room thermostat is then in the previous menu for selec-
tion of functions again.
To leave the menu and return to the regular display, push the
button "MENU" (4), repeatedly if required.
69