Sygonix tx.5 Mode D'emploi page 68

Proceed as follows:
1. After selecting this function G7 "FLORT SETTINGS" and con-
fi rming with "OK" (5), the display "YES" or "NO" fl ashes.
2. Use the buttons "–" (3) and "+" (2) to select:
"YES" = External sensor activated
"NO" = External sensor deactivated
3. Confi rm the setting with "OK" (5).
The value for the temperature setting for the external sensor
fl ashes in the display.
4. Set the temperature with the buttons "–" (3) and "+" (2).
5. Confi rm the setting with "OK" (5).
The room thermostat is then in the previous menu for selec-
tion of functions again.
To leave the menu and return to the regular display, push the
button "MENU" (4), repeatedly if required.
If the function G7 "FLORT SETTINGS" was activated (set-
ting "YES"), the display then shows the temperature
measuring value of the internal and external sensor al-
ternatingly afterwards:
Internal sensor: Display "ROOM temperature"
External sensor: Display "FLOOR temperature"
68
The home technology brand for the entire house. More information at www.sygonix.com