Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• We recommend that you clean your
electric power tool immediately after
each use.
• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap. Do not use any cleaning or solvent
materials; these can attack the device's
plastic components. Make sure that no
water can get inside the electric power
tool.
• Do not let liquids of any kind enter the
Nexxsaw.
• From time to time check that all screws
are firmly secured.
• Store the Nexxsaw and the accessory
indoors in a dry place that is protected
from dust, dirt and extreme
temperatures.
• Store the Nexxsaw out of reach of chil-
dren and persons in need of supervision.
10. Technical data
Battery voltage: . . . . . . . . . . 18 V Li-Ion
No load speed: . . . . . . . . . . . 2900 min
No load chain speed: . . . . . . . . . 3.7 m/s
Total sword length: . . . . . . . . . .156 mm
Effective sword length: . . . . . . . . 110 mm
Max. cutting depth: . . . . . . . . . . 110 mm
Product weight without accessories:
. . . . . . . . . . . . . . . . . . . . . . . 1.5 kg
Sound pressure level L
Uncertainty K
pA
Sound power level L
Uncertainty K
WA
Hand/arm vibration: . . . . . . . . 1.401 m/s
Uncertainty K: . . . . . . . . . . . . .1.5 m/s
Vibration level
10.1
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
• using the tool for different applications,
or with different or poorly maintained
accessories, may significantly increase
the exposure level
7063578-Nexxsaw-Ma-WoF-1910-08.indb 11
: . . . . .77.63 dB(A)
pA
: . . . . . . . . . . . . 3 dB(A)
: . . . . . 88.63 dB(A)
WA
: . . . . . . . . . . . . 3 dB(A)
• the times when the tool is switched off
or when it is running but not actually
doing the job, may significantly reduce
the exposure level
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns.
11. Accessories – optionally
available
Titanium coated chain . Item-No. 7063645
Bar . . . . . . . . . . . . . Item-No. 7063646
Bar protector . . . . . . . Item-No. 7063647
Extension pole . . . . . . Item-No. 7063649
18 V Chain Sharpener . . Item-No. 7063640
File with holder. . . . . . Item-No. 7063648
12. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
-1
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council.
Batteries
12.1
Think of the environment when disposing of
batteries. Contact your local authorities to
2
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
2
refuse. Do not dispose of by burning, risk of
explosion.
English
11
15-10-19 17:12
Publicité
Table des Matières
