Fine Adjustment Cutting Precision; Technical Data - Batavia T-Raxx BT-PS002 Mode D'emploi

FINE ADJUSTMENT CUTTING PRECISION

The cutting precision for straight cuts (90° cuts)
is factory-set. Use a 3 mm Allen key to adjust
the cutting precision at the bottom of the base
plate.
1. Use a setsquare to adjust the saw blade to
the 90° angle.
2. Swivel the plunge saw to the side and set
the cutting precision by means of the stud
screws.
The cutting precision for straight 45° miter cuts
is factory-set.
1. Swivel the plunge saw to 45° position to set
the 45° mark arrow (see circle).
2. Use a setsquare to check the angle.
3. Swivel the plunge saw to the side and set
the cutting precision by means of the stud
screws.
32
7061494-T-Raxx_1200W-Ma-1805-17.indd 32

TECHNICAL DATA

Mains power:
Power:
No load speed:
Miter setting:
Saw blade dimensions:
Weight:
Protecting class:
Max. cutting depth
with guide rail:
Max. cutting depth
without guide rail:
Max. cut with guide rail:
Max. cut without guide rail: 42 mm at 45°
Miter cut
Noise pressure level (L
Uncertainty
Sound power level (L
Uncertainty
Hand-Arm-Vibration
Hand grip
Hand-Arm-Vibration
Additional hand grip
Protecting rating
DISPOSAL
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The electric
power tool and its accessories are made
from various materials such as metals and
plastics. Take defective components to a
special refuse collection point. Ask about
these at your specialist shop or local council.
230-240 V~
50 Hz
1200 W
5500 min
-1
0° - 48°
165 x 2,2 x 20 mm
5.4 kg
II
54 mm at 90°
54 mm at 90°
38 mm at 45°
0 - 48°
) 92 dB(A),
pA
K = 3 dB(A)
): 103 dB(A),
WA
K = 3 dB(A)
2.713 m/s
2
K = 1.5 m/s
2
5.838 m/s
2
IP20
17-05-18 10:30