Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Failures und Assistance
If something does not work...
DANGER
Mortal danger!
MORTAL DANGER!
Improper repair work can lead your
device to no longer work safely.
You endanger yourself and the
environment.
Often, it is only a small error leading to a failure.
In most cases, you can easily fix this yourself.
Please check the following table first before
contacting your dealer That way you will save
yourself much trouble and possibly some expense
too.
Engine does not work.
No voltage?
• Check cable, plug, Socket and fuse.
Engine overheats?
• Remove the cause for overheating, let cool
down for a few minutes then restart.
Device overloaded?
• Remove the cause of overload.
Cutting not performing enough.
Is the saw blade dull?
• Change saw blade (☞ Change saw blade
– Page 19).
Is the saw blade suitable for that material?
• Change saw blade (☞ Change saw blade
– Page 19).
The saw vibrates strongly.
Is the saw blade warped?
• Change saw blade (☞ Change saw blade
– Page 19).
Is the saw blade badly fixed?
• Change saw blade (☞ Change saw blade
– Page 19).
If you cannot fix the problem yourself, then
contact your dealer. Please note that improper
repairs invalidate the guarantee and that you may
incur additional costs, where appropriate.
Technical data
Nominal voltage
Frequency
Nominal power
Safety class
Degree of protection
Cable length
Idle speed
Saw blade diameter
(outer)
Saw blade bore (inner)
Saw blade's thickness
TCT
HSS
Diamant
Admissible
type of saw blade
Sound pressure level L
Uncertainty
Sound power level L
WA
Uncertainty
Vibration
Uncertainty
Cutting depth max.
*) the values mentioned are emission levels and
must therefore not be used to represent safe
workplace values. Although there is a
correlation between emission and exposure
levels, it cannot be reliably derived from them
whether extra caution is required or not.
Factors that influence the exposure level on
the current working space include the type of
working space, other noise sources, for
example the number of devices and other
near-by work processes. The values accepted
for one working space also may vary from
country to country.
This information will however enable the user
to better assess the dangers and risks
involved.
Spare parts/Accessories
Spare parts and accessories can be ordered through
our webshop: www.batavia.eu
EN
230 V~
50 Hz
600 W
II / doppelisoliert
IP 20
3000 mm
5000 min
-1
89 mm
10 mm
1,9 mm
1,2 mm
1,8 mm
TCT
HSS
Diamant
83,1 dB(A)
pA
K = 3 dB(A)
94,1 dB(A)
K = 3 dB(A)
a = 2,451 m/s
2
K = 1,5 dB(A)
28,5 mm
25
Publicité
Table des Matières
