EUROM TH1800S Manuel D'utilisation page 16

Description
1. control box
2. emitter
3. cable clamp
4. screw
5. adjustable tube
6. coupling nut
7. upper tube
8. middle tube
9. lower tube
10. base
11. washer
12. L-shaped screw
13. clamping screw
14. main switch
15. ON/OFF buttons + sensor
Assembly
 Remove all the packaging material and check that all the parts are present.
Ensure that definitely no packaging material has remained around the 'head' of
the radiator. Ensure there is a clear work space and keep flammable materials
out of the area.
 Check the device, the electrical cable and the plug for damage. Do not connect
the device to the mains if you notice any damage!
 Do not connect the terrace radiator to the mains before it is fully assembled!
 To assemble the terrace radiator, you will need a Phillips screwdriver. Follow the
instructions below step by step. If you have any doubts about anything, you
should consult your dealer.
 Insert the lower tube (9), with the plate welded to the bottom, through the hole
in the base with cover (10). The extra projecting tongue should slot into the
16