Warranty; Warranty Replacement And Adjustment - Agilent Technologies TriScroll 300 Série Manuel D'installation Et D'opération

Warranty

Products manufactured by Seller are warranted against
defects in materials and workmanship for twelve (12)
months from date of shipment thereof to Customer, and
Seller's liability under valid warranty claims is limited, at
the option of Seller, to repair, to replace, or refund of an
equitable portion of the purchase price of the Product.
Items expendable in normal use are not covered by this
warranty. All warranty replacement or repair of parts shall
be limited to equipment malfunctions which, in the sole
opinion of Seller, are due or traceable to defects in
original materials or workmanship. All obligations of
Seller under this warranty shall cease in the event of
abuse, accident, alteration, misuse, or neglect of the
equipment. In-warranty repaired or replaced parts are
warranted only for the remaining unexpired portion of the
original warranty period applicable to the repaired or
replaced parts. After expiration of the applicable warranty
period, Customer shall be charged at the then current
prices for parts, labor, and transportation.
Reasonable care must be used to avoid hazards. Seller
expressly disclaims responsibility for loss or damage
caused by use of its Products other than in accordance
with proper operating procedures.
Except as stated herein, Seller makes no warranty, express
or implied (either in fact or by operation of law), statutory
or otherwise; and, except as stated herein, Seller shall
have no liability under any warranty, express or implied
(either in fact or by operation of law), statutory or
otherwise. Statements made by any person, including
representatives of Seller, which are inconsistent or in
conflict with the terms of this warranty shall not be
binding upon Seller unless reduced to writing and
approved by an officer of Seller.
viii
TriScroll 300 Series Vacuum Pump

Warranty Replacement and Adjustment

All claims under warranty must be made promptly after
occurrence of circumstances giving rise thereto, and must
be received within the applicable warranty period by
Seller or its authorized representative. Such claims should
include the Product serial number, the date of shipment,
and a full description of the circumstances giving rise to
the claim. Before any Products are returned for repair
and/or adjustment, written authorization from Seller or its
authorized representative for the return and instructions
as to how and where these Products should be returned
must be obtained. Any Product returned to Seller for
examination shall be prepaid via the means of
transportation indicated as acceptable by Seller. Seller
reserves the right to reject any warranty claim not
promptly reported and any warranty claim on any item
that has been altered or has been returned by
non-acceptable means of transportation. When any
Product is returned for examination and inspection, or for
any other reason, Customer shall be responsible for all
damage resulting from improper packing or handling, and
for loss in transit, notwithstanding any defect or
non-conformity in the Product. In all cases, Seller has the
sole responsibility for determining the cause and nature of
failure, and Seller's determination with regard thereto
shall be final.
If it is found that Seller's Product has been returned
without cause and is still serviceable, Customer will be
notified and the Product returned at its expense; in
addition, a charge for testing and examination may be
made on Products so returned.
3/1/00