Extending The Telephone System; Special Functions - switel DCT627 Série Mode D'emploi

Extending the Telephone System

‘ or ƒ
Extending the Telephone System
9
The internationally approved GAP
and base stations from different manufacturers. As a result, it is possible to integrate
SWITEL devices and devices from other manufacturers together in one telephone sys-
tem. It is possible, however, that some functions are not available.
Multiple handsets
5
Up to handsets can be registered on the base station.
Registering handsets
Before starting to register a handset, switch the base station to Registration mode.
15 sec. ‘
Now register the handset; . Chapter 5.
Use your current PIN code, . Chapter 5, to register it.
The handset is automatically assigned an internal call number following registration.
The internal call number appears in the display.
To register handsets from other manufacturers, please refer to the opera-
ting manual supplied with them.
Deregistering handsets
A handset can only be deregistered from a base station by using another
handset registered to the same base station.
Handsets are deregistered via the menu. Chapter 5 indicates the position in the menu.
Multiple base stations
You can increase the range of your handset by registering it on several base stations.
The handset can be registered on up to 4 different base stations simultaneously. Each
base station requires its own telephone line socket. Connections can be used with the
same call number or with different ones.
Calls in progress cannot be transferred from one base station to another.

Special Functions

10
Dialling mode
The telephone can be operated in analogue exchanges (PULSE mode) as well as new,
1
GAP: Generic Access Profile = Standard for the interoperation of handsets and
base stations from different manufacturers.
Stops sounding the paging tone
1
standard regulates the compatibility of handsets
Enables the Registration mode
127