Pabx / Supplementary Services - switel DCT627 Série Mode D'emploi

PABX / Supplementary Services

digital exchanges (TONE/DTMF mode). The dialling mode is controlled via the menu.
Chapter 5 indicates the position in the menu.
PABX / Supplementary Services
11
R−button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such as transfer-
ring calls and automatic call back can be used via the R button. Refer to the operating
manual provided with your private branch exchange as to which Flash time must be set
in order to use these functions. The sales outlet where you purchased the exchange
can provide information as to whether the telephone will work properly with the ex-
change. The Flash time is set using the menu. Chapter 5 indicates the position in the
menu.
Dialling pause
When using private branch exchanges, it is necessary to dial an access code to obtain
the dialling tone for an outside line. When using some older private branch exchanges,
it takes a little time before the dialling tone becomes audible. In the case of such private
branch exchanges, a dialling pause can be inserted after the number for an outside line
in order to continue dialling directly without having to wait for the dialling tone. The dial-
ling pause is inserted by pressing and holding the P button for 3 seconds.
The actual phone number is dialled a certain time after the number for an outside line.
R−button and supplementary services
Your telephone supports supplementary services provided by your telephone network
provider, such as brokering, call waiting and conference facilities. These supplementary
services can be used by implementing the R button. Please contact your telephone
network provider regarding which Flash time must be set to use the supplementary ser-
vices. Contact your telephone network provider with regard to enabling supplementary
services. The Flash time is set using the menu. Chapter 5 indicates the position in the
menu.
Caller number display (CLIP
If this function is available with your telephone line, the number of the caller appears in
the display when the phone rings. If the caller has suppressed transmission of his
phone number, the corresponding message appears in the display. The phone number
1
CLIP: Calling Line Identification Presentation = Displays the caller's phone
number.
128
The dialling pause can also be entered with the phone numbers in the phone
book.
1
)
The caller number display (CLIP) is a supplementary service offered by
your telephone network provider. Contact your network provider for further
information.