Answering Machine
S
If no new messages have been recorded on your answering machine, your
call is taken after 5 rings. End the call before the 5th ring. This means that
no charges ensue.
For further information on remote access, refer to . Page 132.
Setting the delay
, n / m
Taking a call being recorded
It is possible to take a call even if the answering machine has already begun to take it.
Recording of the message is stopped in this case.
Answering modes
The answering machine is provided with two, pre−recorded outgoing messages. After
the ANNOUNCE ONLY IS OFF outgoing message has been played, the caller can
leave a message. The ANNOUNCE ONLY IS ON message indicates that the outgoing
message is purely informative and the caller cannot leave a message.
Selecting the answering mode
, n / m
Recording your own outgoing message
The answering machine is provided with a pre−recorded outgoing messages (OGM).
The OGM can be replaced with your own text. When the answering machine's memory
is full, the ANNOUNCE ONLY IS ON message is automatically played to callers.
Proceed as follows to change the answering mode outgoing message.
Playing the outgoing message
, n / m
Recording outgoing messages
, n / m
Now speak your message clearly and precisely in the microphone.
r
On ending the message, it is played back.
130
RING DELAY IS SET TO 3/4/5/6/TIME
SAVER
Change the setting
Take the call
ANNOUNCE ONLY IS OFF /
ANNOUNCE ONLY IS ON
Change the setting
ANNOUNCEMENT IS...
ANNOUNCEMENT IS...
Start recording
End recording