Viscount UNICO P 35 Guide De L'utilisateur page 53

User Guide
Functioning of different modes is described in the tables below.
Organs equipped with 4 audio outputs:
MODE OUTPUTS 1-2
As set in Ext. Router
STANDARD
Conf. function.
GENERAL-REVERB General signal
Organs equipped with the expansion kit for 12 audio outputs:
MODE OUTPUTS 1-8
As set in Ext. Router
STANDARD
Conf. function.
As set in Ext. Router
GENERAL-REVERB
Conf. function.
As set in Ext. Router
ANTIPHONAL
Conf. function.
As set in Ext. Router
GENERAL-ANTIPH.
Conf. function.
As set in Ext. Router
ANTIPH.-REVERB
Conf. function.
NOTE
In the models equipped with 4 audio outputs, it is not possible to configure the registers output
router in the EXTERNAL OUT ROUTER function selecting the GENERAL+REVERB outputs mode.
OUTPUTS 3-4
As set in Ext. Router
Conf. function.
Reverberated signal only
OUTPUTS 9-10 OUTPUTS 11-12
As set in Ext. Router As set in Ext. Router
Conf. function. Conf. function.
General signal Reverberated signal only
As set in Ext. Router As set in Ext. Router
Conf. function. Conf. function.
As set in Ext. Router
General signal
Conf. function.
As set in Ext. Router
Reverberated signal only
Conf. function.
51
Viscount UNICO P
TAB AMPLIFICAT. TAB AMPLIFICAT.
[CONSOLE ON] [EXT. SPEAKER ON]
Internal amplification Outputs 1-12
Internal amplification Outputs 1-12
Outputs 1-8 Outputs 9-12
Outputs 1-10 Outputs 11-12
Outputs 1-8 and
Outputs 9-10
11-12
35