Hints For Test Institutes - Progress PV 1530 Notice D'utilisation

Water supply pressure
Capacity

Hints for test institutes

Testing in accordance with EN 60704 must
be carried out with appliance fully loaded and
using the test programme (refer to 'Con-
sumption values').
Test in accordance with EN 50242 must be
carried out when the salt container and rinse
Amount of detergent required:
Rinse aid setting
Arrangement upper basket
Arrangement lower basket
Minimum
Maximum
Full load: 12 standard place settings
5 g + 25 g (Type B)
position 4 (Type III)
aid dispenser have been filled with salt and
rinse aid respectively and using the test pro-
gramme (refer to 'Consumption values').
Cup racks: position A
Arrangement cutlery basket
progress 81
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
12 place settings