Safety; Safety Devices; Safety Notes; Disposal - Tecno-gaz ONYX B 7.0 Mode D'emploi

03
3.1 Safety marking
3.2

Safety devices

The following safety devices are installed:
1. Safety valve set at 2.4 bar 0/+10%
2. Electromagnetic lock to prevent the door from opening while the cycle is running
3. Resistance over temperature thermostats
3.3

Safety notes

1. The manufacturer is liable for the marketed product in accordance with
currentregulations. The manufacturer's liability will expire when operations are
carried out on the device, or a part of it, by unskilled personnel or using non-original
spare parts.
2. There should be no potential risk of explosion and/or fire in the room where the
autoclave is installed.
3. The autoclave should be installed in a special well-ventilated room.
3.4

Disposal

.
Refer to annex
Cod. 0Z00H0004

SAFETY

HAZARDOUS
VOLTAGE
DISCONNECT
THE POWER
BEFORE
REMOVING
THE LID
ENGLISH
HIGH
TEMPERATURE
EARTH
CONNECTION
5