Tecno-gaz ONYX B 7.0 Mode D'emploi page 57

BLACK PLASTIC SPACER PIN
Put the spacer in the autoclave's back panel (Fig.A–pos.
good ventilation if you place the autoclave near a wall.
Picture
Envelope standard
Code
FITTING FOR REAR TAPS DISCHARGE
Tighten the loading faucet (Fig.A-pos.
faucet (Fig.A-pos. 6
Picture
Envelope standard
Code
PIPE FOR DISCHARGE UTILITIES
1 - Clean water overflow hose
2 - Used water overflow hose
1- Connect one end of the hose to the clean water overflow hose fitting (Fig.A-pos.
the other in a water recovery container.
2- Connect one end of the hose to the fitting (Fig. A–pos.
recovery container.
Picture
Envelope standard
Code
) to empty the drain tank.
0
Fig.8
CPAP014
4 ) to empty the loading tank and tighten the drain
Fig.9
CPRG096
5
Fig.10
SXBA799
). It's necessary for guarantee a
1
1
), and the other to a used water
2
ENGLISH
7 ), and
11