Printout; Declaration Of Confirmity - Wohler FA 320 Mode D'emploi

Press the ENTER key to save the new input.
-
Enter the Z-value pressing the HOLD and the Mx/Mn key.
-
Example :
Z: 675.5838
Display:
-
06
-
75.584
-
Press the ENTER key to save the new input.
-
4.

Printout

Via an infrared interface, the measured values can be transmitted to a thermo
printer.
To start the infrared transmission on FA 320, press the ENTER- key for 2 sec-
onds.
The LCD display blinks and transmission is in processing. Then it stops blinking
when transmission completes.
The readings can be printed on the thermo printer now.
5. Declaration of Conformity
WÖHLER Messgeräte Kehrgeräte GmbH
Schützenstr. 41, D-33181 Bad Wünnenberg
declares that the device
Wöhler FA 320 Fan Anemometer
complies with the essential protection requirements of Council directive
89/336/EC, 92/31/EEC and 93/68/EEC on the approximation of the laws of the
Member States relating to electromagnetic compability.
The meter conforms to the following standards:
EN 61000-6-3 : 2001
EN 55022 : 1998 + A1 : 2000 + A2 : 2003
EN 61000-6-1 : 2001
EN 55024 : 1998 + A1 : 2001 + A2 : 2003
EN 61000-4-2/-3
This declaration is based on third party measurements.
24 Hotline: +49 2953 73-211 Fax: +49 2953 73-250
Wöhler FA 320