Safety Functions; Operation Startup - Grizzly AKS 2440 Lion Traduction De La Notice D'utilisation Originale

mains before closing or opening
connection to the battery / power
tool / device. This ensures that the
battery and charger are not dama-
ged.
• Keep the charger clean and away-
from wet and rain. Do not use the
charger outdoors. Dirt and the entry
of water increase the risk of electric
shock.
• Operate the charger only with the
appropriate original batteries. Char
ing other batteries may result in in-
juries and risk of fire
• Avoid mechanical damage to the
charger. This can result in internal
short circuits.
Do not operate the charger on a
•
combustible surface (e.g. paper,
textiles). Risk of fire due to heating
during char ging.
• If the power cable for this equip-
ment is damaged, it must be repla-
ced by the manufacturer, a custo-
mer service agent of the same or a
similarly qualified person in order
to prevent hazards.

Safety functions

A 1 Rear grip with hand guard (16)
Protects the hand against branch-
es and boughs in the case of
springing away by the chain.
3 Chain braking lever/hand
guard
Control system, which stops the
saw chain immediately in case of
a spring-back; lever can also be
activated manually; protects the
left hand of the operator if it slides
from the front grip.
5 Saw chain with small spring-
back
helps you to catch spring-backs
with specially developed control
systems.
7 Metal stop claw
Reinforces the stability when
vertical cuts are carried out and
facilitates sawing.
9 Electric motor
Double insulated for safety rea-
sons.
10 On-off switch with safety chain
brake
On releasing the On/Off switch,
the device immediately switches
off.
11 Switch-on block
The switch-on block must be
released for switching on the
device.
12 Chain catcher
Decreases the danger of injuries
if the chain breaks or if it comes
off.

Operation startup

Always wear protective gloves
when working with the chainsaw
and employ only original parts.
Injury hazard!
Prior to commissioning the device, you
must:
- assemble the blade and the sawing
chain
- tension the sawing chain
- fill it with biological chain oil
- charge and insert the battery
(see „charging process")
- test the oil automatics and the operabi-
lity of the chain brake
.
GB
147