Time Delay Function; Keep Warm Function - Redmond RMC-M90FR Manuel D'utilisation

Time Delay Function

This function allows setting the program to finish by certain time. Cooking time may be delayed for a period from 10 minutes to 24 hours with 10
minute intervals. Setting Time Delay function, take the cooking time of the program into consideration. The time of a delay should be longer than
the cooking time of the program selected; otherwise the program starts running right after you press "Départ".
When the automatic program is selected and the temperature and cooking time are adjusted, you may set the "Time Delay".
1. Press "Départ différé" button to enter the Time Delay setting mode. The words "Départ différé" are displayed. Timer is blinking.
2. Press "Heure" button repeatedly to adjust the hours in 24 hour format. Hold the button down to scroll through the digits.
3. Press "Min" button repeatedly to adjust the minutes. Hold the button down to scroll through the digits.
4. If you need to set the delay of less than 1 hour, repeatedly press "Heure" button to reset to zero and adjust the minutes using "Min" button.
5. To cancel the settings press "Réchauffer/Annuler" button and reset.
6. When the time is set press and hold down the "Départ" button. Time Delay function indicator lights up. Set program starts running and the
countdown begins.
7. Your meal will be ready when the time set expires. When the program finishes, the device automatically switches to "Keep Warm" ("Réchauffer/
Annuler" button indicator lights up).
8. Press "Réchauffer/Annuler" button to cancel the "Keep Warm". Button indicator goes off.
Time Delay function is available in all automatic programs except "FRIRE", "PÂTES" and "EXPRESS".
It is not recommended to use Time Delay function if dairy and other perishable products are being used (eggs, fresh milk, meat, cheese etc.).
Setting the "Time Delay" in "VAPEUR" program remember that the countdown starts only when the device reaches its operating temperature (water comes
to a full boil).

Keep Warm Function

Function is being automatically activated at the end of the cooking program. When the program finishes, the temperature of the meal (70–75°C) is
being maintained for a period of time up to 24 hours. "Réchauffer/Annuler" button indicator lights up and the "Keep Warm" count up is being displayed.
Press and hold down "Réchauffer/Annuler" button to disable the function.
Disabling The "Keep Warm" In Advance
Automatic activation of the Keep Warm function at the end of the program may sometimes be undesirable. REDMOND RMC-M90FR allows disabling
the function in advance, while setting the program or during its operation. Press and hold down the "Menu/Maintien au chaud" button to cancel the
function. "Réchauffer/Annuler" button indicator goes off. To reactivate the function, repress and hold down the "Menu/Maintien au chaud" button
("Réchauffer/Annuler" button indicator goes off).
RMC-M90FR
GBR
39