Manually Setting Clock; Loudness; Tone; Additional Metal Telescopic Antenna - PERFECTPRO Handsfree 2 Mode D'emploi

MANUALLY SETTING CLOCK

The clock can only be manually set when the radio is in standby mode. If no buttons are
pressed for 5 seconds, the radio will exit the clock setup and the setting is cancelled.
Press and hold the Time Set knob for 12 seconds until the hour digits flash on the
1.
display.
2. Rotate the Time Set knob to set the hour.
3. Press the Time Set knob to confirm, the minute digits flash.
4. Rotate the Time Set knob to set the minute.
5. Press the Time Set knob to confirm, the day flashes on the display.
6. Rotate the Time Set knob to set the current day.
7. Press the Time Set knob to confirm, the month flashes.
8. Rotate the Time Set knob to set the current month.
9. Press the Time Set knob to confirm, the year will then flash on the display.
10. Rotate the Time Set knob to set the current year.
11. Press the Time Set knob to confirm, "SYNCLOCK ON" flashes.
12. Rotary the Time Set knob to select "SYNCLOCK ON" or "SYNCLOCK OFF".
13. Press the Time Set knob to confirm and finish the clock setting.
RDS time synchronisation
If "SYNCLOCK ON" is selected, the symbol "
RDS stations transmit a time signal. If reception is good and you have selected the
"SYNCLOCK ON" option during the time setting, the time will be automatically updated
(" " flashes on the display). Time synchronization can take several minutes. The
automatic time setting is always activated when the radio is switched from standby to
FM broadcasting and receives a RDS station.

LOUDNESS

The Loudness function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is on a lower volume level (Dynamic
Loudness).
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, and then rotate the Tuning knob until the display shows
"System".
3. Press the Tuning knob; rotate the Tuning knob until the display shows "Loudness".
4. Rotate the Tuning knob to select between "Loudness On" or "Loudness Off". Press
the Tuning knob to confirm the setting and return to normal display.
19
" will show on the clock display. Some

TONE

The Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the On/Off button to turn on the radio.
Press and hold the Volume knob for about 3 seconds, the display shows "BASS 0".
2.
3. Rotate the Volume knob to set the desire Bass level.
4. Press the Volume knob to confirm, the display shows "TREBLE 0".
5. Rotate the Volume knob to set the desire Treble level.
6. Press the Volume knob to confirm and return to normal display,

ADDITIONAL METAL TELESCOPIC ANTENNA

You can use this as an alternative antenna for your radio in areas or locations where the
radio signal (FM/DAB/DAB+) is weak to very weak.
ATTENTION: The standard antenna on the radio is flexible. The metal antenna
is not flexible or bendable and should be used with care. Breaking or bending
antennas is not covered by warranty.
Installing: Carefully screw off the standard flexible antenna. First carefully loosen the
antenna with an open-end-wrench (size 14) – turn counter clockwise.
Carefully screw on the metal telescopic antenna and softly tighten it with an open-end
wrench key (size 14) – turn clockwise.
ATTENTION: do not use too much force when fixing the antennas as this can
damage the screw threat of the antennas or make it break off.

LANGUAGE SETTING

The menu of the radio can be configured to various languages.
1. Press the On/Off button to turn on the radio.
Press the Menu button, and then rotate the Tuning knob until the display shows
2.
"System".
3. Press the Tuning knob; rotate the Tuning knob until the display shows "Language".
4. Press the Tuning knob to enter the language adjustment menu.
5. Rotate the Tuning knob until the desired language appears on the display (default
is English).
6. Press the Tuning knob to confirm your choice. The display menu will change to the
chosen language.
GB
GB
20