Charging A Mobile Phone; Aux In Mode - PERFECTPRO Handsfree 2 Mode D'emploi

File searching
1. Press and hold the Tuning knob for a few seconds until the display shows
the current folder number and the total folder number in the first line.
The second line shows the name of the current folder.
2. Rotate the Tuning knob to search the desired folder. Press the Tuning knob to
select the folder.
The display will show the first file of the selected folder.
3. Rotate the Tuning knob to search the desired file. Press the Tuning knob to select
the file. The radio will start to play the selected file.
The radio supports a limited number of folders and files in the searching:
Mode Max. no. of folders supported
Stop 999 (with folder name)
Play 999
(1-99 with folder name)
(100-999 without folder name)
Play mode
During USB memory device is playing,
1. Press the Menu button,
2. Rotate the Tuning knob until the display shows "Play mode". Press the Tuning
knob.
3. Rotate the Tuning knob to the desire play mode and press the Tuning knob to
confirm.
The radio will step through the following options:
Repeat 1 → Repeat Folder → Repeat All → Random → Normal Play
Repeat 1 Repeatedly play the file you are listening to.
Repeat Folder Repeatedly play the files within the folder you are listening to.
Repeat All Repeatedly play all files in the USB memory device.
Random Play all files in the USB stick once in random order.
The selected Play Mode is indicated on the right of the top line of the display by an icon.
No icon is shown when in Normal Play mode.
Information function
During USB memory device playback, press the Info button to cycle
through the following information (only if this information is present with the file on the
memory device):
File name (song) → Folder name → Artist name → Album name →Total no. of files
on the USB stick → Clock time and Date → Normal playback status (play time).
17
Max. no. of files supported
9999 (with file name)
9999
(1-999 with file name)
(1000-9999 without file name)

CHARGING A MOBILE PHONE

The USB socket on the left side can provide DC power of 5V/1A for charging a mobile
phone. Connect the mobile phone to the USB socket with an appropriate cable (not
included with this radio). The USB power is available in all modes, including standby
mode.
Refer to the user manual or the manufacturer of the mobile phone to verify if it supports
charging from an USB power.
Warning: Never use the USB socket in rainy or moist conditions to prevent moist from
entering the radio and so to prevent potential short circuit. Always keep the rubber cover
well closed under these conditions.
It is recommended to use AC power while charging a mobile phone via USB socket. On
DC power it is also possible to charge a mobile phone from the USB socket, however
using DC power to charge a mobile phone will consume energy from the batteries and
so drain the batteries easily.

AUX IN MODE

A 3.5mm stereo Aux-In socket is provided on the side behind the rubber cover, for
connecting an external audio device such as MP3 player or CD player (Aux cable not
included with this radio).
1. Connect an external player to the Aux-In socket.
2. Press the Source button to select AUX input. Display will show "AUX IN".
3. Play the external player.
4. Adjust the volume both the radio and the player for comfortable listening.
5. After use, close the rubber cover to prevent moist or dust from entering into the
sockets and radio.
Notes: Never use the Aux-In socket in rainy or moist conditions to prevent moist from
entering the radio. Keep the rubber cover well closed under these conditions.
The Auto-Power management function will be activated in AUX IN mode. If there is no
signal* from the Aux-In socket for a period of over 15 minutes, the Handsfree radio will
automatically switch to standby mode. Pressing the On/Off button will wake up the unit.
* Also when the incoming signal from the external device is too low and cannot be
detected for a period of over 15 minutes by the Auto-Power management, the Handsfree
radio will switch to standby mode.
To prevent this raise the output level of the external device enough to be detected.
GB
GB
18