Charging The Batteries - PERFECTPRO USB BOX Mode D'emploi

Charging the batteries

Reduced power, distortion and a "stuttering" sound or low battery sign
flashing on the LCD display are all signs that the batteries need
replacing or recharging.
Note:
The batteries can be charged only when the radio is off.
Connect the AC power cord into the AC socket to charge the batteries.
Be sure the battery type switch is set to Charger position.
When the batteries are being charged, the red Charge LED will
be flashing. Charging time can take up to approx. 10 hours depending on
the battery capacity of the rechargeable batteries. When the batteries
are fully charged, the charged LED will be steady on.
Note:
Charge new batteries fully the first time before first use.
This can take longer depending on the capacity of the
rechargeable batteries.
Do not use a mix of old and new rechargeable batteries.
Do not use a mix of full and empty rechargeable batteries.
Do not use batteries that have a different mAh capacity.
Do not use damaged or leaking batteries.
9