Charging The Batteries - PERFECTPRO DAB+MATE Mode D'emploi

Charging the batteries

GB
Reduced power, distortion and a "stuttering sound" or low battery sign
flashing on the LCD display are all signs that the batteries need recharged
if you use rechargeable batteries to power the radio.
Note:
The radio can be charged only when the radio is off. Connect the AC
power cord into the AC socket to charge the batteries. Be sure the
battery type switch is set to Ni/MH position. When the batteries are being
charged, the red Charge LED will be on. Charging time can take up to
approx. 10 hours depending on the battery capacity of the rechargeable
batteries. When the batteries are fully charged, the charged LED will be
steady on green color.
Note:
Charge new batteries fully the first time before first use. Duration for
charging your batteries fully can vary according to the mAh capacity of the
batteries. Higher mAh batteries require longer charging time.
Important:
Under some conditions the charging LED indicator may switch off after
flashing briefly. This may happen if the batteries are already freshly
charged, or if the radio detects that you may be attempting to recharge
alkaline batteries or mixed different types or capacity of rechargeable
battery. In these cases the charging will be stopped.
I N S TA L L O N LY P R E - C H A R G E D ( TO T H E S A M E V O LTA G E
LEVEL) NIMH BATTERIES WITH "LOW SELF-DISCHARGE"
CHARACTERISTICS. USE OF ORIGINAL PERFECTPRO BATTERIES
IS HIGHLY RECOMMENDED.
7