Charging The Batteries - PERFECTPRO CUBI 2 Mode D'emploi

Charging the batteries

Reduced power, distortion and a "stuttering sound" or low battery
sign " " flashing on the display are all the signs that the batteries
GB
need to be recharged if you use rechargeable batteries to power
the radio.
Note:
The batteries can be charged only when the radio is off. Connect
the AC power cord into the AC socket to charge the batteries. Be
sure the battery type switch is set to MiMH / NiCad position.
Battery charging function of this radio only applies to the 6 D-size
(UM-1) batteries and not to the AA-size (UM-3) back up batteries.
When the batteries are being charged, the LED charging indicator
above the STANDBY button will turn red. It will turn green when the
batteries are fully charged.
Charging time can take up to approx. 10 hours depending on the
capacity of the rechargeable batteries. Only charge batteries in
room temperature between 5 degrees C and 35 degrees C.
In lower or higher temperature full charge cannot be achieved and
there may be damage to the batteries or the receiver.
Charge new batteries fully the first time before first use. This can
take longer depending on the capacity of the rechargeable batter-
ies.
Do not use a mix of old and new rechargeable batteries.
Do not use a mix of full and empty rechargeable batteries.
Do not use batteries that have a different mAh capacity.
Do not use damaged or leaking batteries.