Maintenance And Cleaning; Holiday Mode; Cleaning The Seat And Lid Unit - Grohe SENSIA IGS Notice D'utilisation

OPERATING INSTRUCTIONS

Maintenance and cleaning

10
10.1

Holiday mode

Do not waste resources unnecessarily
during your absence. Use the reset
button to switch the unit to holiday mode.
To do this, hold the reset button down
for three seconds. The white LED display
goes out, and the red one flashes three
times. Energy consumption in this mode
is very low.
In order to activate the shower-toilet
again when you get back, press the reset
button. The spray arm is re-initialised
and moves slightly.
As an alternative to the holiday mode, the unit can also be completely disconnected from
the power supply. This involves turning off the main switch on the bottom left of the unit.
10.2

Cleaning the seat and lid unit

The seat and lid form a single unit. To allow bet-
ter cleaning of the shower-toilet, the seat and lid
unit can simply be removed by folding the seat
and lid upwards and removing both parts from
the hinge vertically ( at approximately 85 ° to the
ceramic bowl ). You can clean the seat and lid,
for example, in the bathtub with lukewarm water.
You can also use a diluted mild liquid cleaning
agent. After cleaning, re assem ble the seat and
lid and guide them vertically into the hinge.
Reset button
247