Shower-Toilet : Led Display - Grohe SENSIA IGS Notice D'utilisation

OPERATING INSTRUCTIONS
White icon
Function is active / in use.
Black icon
Function is inactive / not in use.
Pressing " Menu " always takes you back to the main menu.
This does not save any changes.
2.3

Shower-toilet : LED display

The LED display can be found on the
left-hand side of the unit. It provides
assistance for night-time toilet trips
and information on any main tenance
required or possible faults on your
shower-toilet.
White
Red
Red flashing
White intermittent
flashing
LED display
LED display Information
Normal operation Everything OK.
Care instructions
Fault indications
Care programme
active
Description
The white LED display acts as a night light. You can select
from four brightness levels or deactivate the display using
the remote control.
More detailed information can be found in Section
6.4, LED display.
Please activate the remote control for further information.
More detailed information and descriptions about
the instructions can be found in Section 11.2,
Messages and faults.
Please contact your specialist installation engineer or
the GROHE Customer Service line and have your remote
control to hand for further information.
More detailed information and descriptions about
the problem can be found in Section 11.2, Messages
and faults.
If the white LED display is flashing intermittently, the
decalcification or hygienic flush programme is active.
More detailed information and descriptions can be
found in Section 10.9, Automatic hygienic flush, and
Section 10.11, Automatic decalcification.
212