Energy-Saving Settings; Led Display - Grohe SENSIA IGS Notice D'utilisation

OPERATING INSTRUCTIONS
6.3
BASIC SETTINGS
English
15 – 25 °fH
1
SPECIAL FUNCTIONS
6.4
BASIC SETTINGS
English
15 – 25 °fH
1
SPECIAL FUNCTIONS
Eco
Eco

Energy-saving settings

The GROHE Sensia IGS shower-toilet was developed to
®
minimise energy consumption in standby mode. The factory
settings represent an ideal compromise between comfort and
energy saving. It is therefore recommended that you leave the
factory settings for energy-saving mode, spray temperature
and spray time. These are set as follows :
Energy-saving mode : Eco
Spray temperature for anal shower and lady shower :
approximately 36 °C
Spray time for anal shower and lady shower : 25 seconds
Selecting the energy-saving mode
Select the energy-saving mode you want by pressing the
"Reduce spray temperature " icon several times. You can
select from the following settings :
Description
On
The boiler heating is switched on permanently,
enabling immediate supply of warm water.
Eco The boiler heating switches on as soon as you sit down and user
detection is activated. Warm water is available after approximately
3.5 minutes heating time.
Off The boiler heating is permanently switched off. Only cold water is
available. This is the lowest level of energy consumption.

LED display

The white LED display acts as a night light. Press " LED
display " several times to select from four brightness levels
or to de activate the display.
The white icon indicates that the white LED display is active.
The brightness level is displayed next to the icon ( 1 – 4 ).
The black icon indicates that the white LED display is inactive.
Care instructions and fault indications are still active and
displayed even if the night-light function is switched off.
221