Initial Commissioning Of The Remote Control - Grohe SENSIA IGS Notice D'utilisation

OPERATING INSTRUCTIONS

Initial commissioning of the remote control

4
Pressing the start button in the top right corner
activates the touch-screen remote control. The
first time you use it, a commissioning programme
guides you through the most important settings.
Your plumber may have already done this after
fitting the unit. You can change the appropriate
settings again at any time.
After activating the shower-toilet and the remote
control, the shower-toilet is ready to use. As soon
as you sit on the shower-toilet, the unit can be
operated using the controller or the remote control.
More detailed descriptions can be found in Section 6,
Adjusting basic settings using the remote control.
Start button
216