Changing The Controller Battery - Grohe SENSIA IGS Notice D'utilisation

OPERATING INSTRUCTIONS
10.17
Controller:
low battery
Controller:
Replace battery

Changing the controller battery

The LED display on the shower-toilet shows red.
Message 1 : " Controller : low battery "
There is a message on your remote control saying " Controller :
low battery ". The unit takes one CR2032 3-volt battery. It must
be replaced when the second message appears.
Message 2 : " Controller : Replace battery "
There is a message on your remote control saying " Controller :
Replace battery ". Press " Service information " to switch to the
instructions for changing the battery.
Remain in the direct proximity of the shower-toilet, no more
than two metres away.
The shower-toilet can now only be operated using the
remote control.
263