Hendi 231852 Mode D'emploi page 4

1.2. GENERAL PRECAUTIONS
• The vegetable cutter must be operated only by quali-
fied personnel familiar with the use and sefety inst-
ructions included in this manual.
• In case of personnel rotation, vocational training is
necessary.
• Although the device is equipped with several safety
systems, avoid touching the cutting discs and moving
parts.
2. TECHNICAL DATA
2.1. SPECIFICATION SHEET
Model
231852
2.2. DELIVERY CONDITIONS AND PACKING DISPOSAL
The vegetable cutter is packed in a sturdy cardboard
box with shaped internal edges, which guarantees
perfect integrity of the machine during transport.
EN
3. INSTALLATION
3.1. SETTING THE DEVICE
The device connection and setting must be per-
formed by qualified personnel.
WARNING: both the system and location where the
equipment is to be installed must comply with the
occupational safety and health regulations as well
as other regulations in force.
3.2. ELECTRIC CONNECTIONS
The device is supplied with an electrical cable to be
connected to a thermal magnetic switch switching
off the device in case of accidental contact of the op-
The manufacturer and the seller shall not be held liable for any direct or indirect damage which may result from failure to observe the
local regulations n force.
The vegetable cutter is manufactured to be used with 230V ~50Hz single-phase connection. If the voltage is different from the data
specified on a rating plate, please contact the seller.
4
Dimensions Weight
mm Kg
500X250X(H)470 26
• Before any cleaning and maintenance operations
check if the device is disconnected from the mains.
• Periodicaly check the cables and electrical elements.
• Do not use the device to cut frozen food. Remove all
hard parts from foodstuffs before cutting to avoid da-
mage of the cutting blades.
• Never replace any parts of the device by yourself. Call
the authorized service.
Power Electrical
Watts Connection
750W 230V ~50Hz
Each device includes:
• Operations and maintenance manual.
• Ejecting disc.
• All packing components (cardboard box, foam,
straps etc.) Can easily be disposed of as municipal
waste.
The manufacturer and the seller shall not be held
liable for any the manufacturer and the seller shall
not be held liable for any regulations.
Place the device on a wide, levelled, dry and stable
surface, away from heat sources and water jets.
erator with moving parts.
The device must be grounded according to the local
regulations in force.
RPM
Disc
300 RPM