Mounting The Deflector - Stihl FS 240 Notice D'emploi

Mounting the deflector

Mounting the Deflector
1
3
2
3
1 Deflector for mowing attachments
2 Deflector for mowing heads
Deflectors (1 and 2) are both mounted to
the gearbox in the same way.
Place the deflector on the gearbox
N
flange.
Insert the screws (3) and tighten
N
them down firmly.
FS 240, FS 240 R
Fitting the Skirt and Blade
WARNING
Risk of injury from thrown objects and
contact with the cutting attachment.
These parts must be fitted to the
deflector (1) when you use a mowing
head.
Fitting the Skirt
Slide the lower guide slot of the skirt
N
onto the deflector – it must snap into
position.
Removing the Skirt
2.
Insert the stop pin into the hole in
N
the skirt and use it to push the skirt
to the left.
Pull the skirt off the deflector.
N
Mounting the Blade
Slide the line limiting blade into the
N
guide on the skirt.
Insert the screw and tighten it down
N
firmly.
Mounting the Limit Stop
6
WARNING
Risk of injury from thrown objects and
contact with the cutting attachment.
Always fit the limit stop (6) when you use
a circular saw blade.
1.
Position the limit stop (6) on the
N
gearbox flange.
Insert the screws (7) and tighten
N
them down firmly.
English
7
19